Ask a Question About This Product
- Stock: In Stock
- Model: SM-ORT-10225
- Weight: 0.30kg
Available Options
Jansen Bone Rongeur 18 cm (7") - Straight & Curved
Product Overview
Jansen Bone Rongeur 18 cm by SIMAECO MEDICAL is a surgical instrument designed for controlled removal and trimming of small bone fragments during appropriate surgical procedures. Also known as a bone nibbler, it uses opposing cutting jaws to remove small portions of bone through successive bites.
The Jansen Bone Rongeur is available in straight and curved patterns. The straight design provides a direct working-end orientation, while the curved version offers an alternative approach angle for access to selected surgical sites. Both configurations are cataloged at 18 cm (7 inches).
SIMAECO MEDICAL is a surgical and medical instrument manufacturer and exporter based in Sialkot, Pakistan. The exact jaw dimensions, material specifications, and finish should be confirmed for the selected model before ordering.
Key Features
- Jansen-pattern bone rongeur for controlled bone removal.
- Available in straight and curved configurations, subject to model selection.
- Specified overall length of 18 cm (7 inches).
- Cutting jaws designed for successive biting action.
- Suitable for appropriate orthopedic and ENT surgical applications.
- Working-end configuration can be selected according to surgical access requirements.
- Designed for professional surgical instrument procurement.
- OEM and private-label enquiries can be discussed with SIMAECO MEDICAL.
Applications
- Bone removal and trimming during appropriate surgical procedures.
- Selected orthopedic surgical applications.
- ENT procedures where the Jansen rongeur pattern is suitable.
- Removal of small bone fragments where indicated by the procedure and instrument design.
- Use by qualified surgical professionals in appropriate clinical settings.
Product Specifications
| Specification | Details |
|---|---|
| Product Name | Jansen Bone Rongeur |
| Overall Length | 18 cm (180 mm / approximately 7 inches) |
| Available Patterns | Straight and curved |
| Primary Category | Orthopedic Instruments |
| Subcategory | Bone Rongeurs - Nibblers |
| Instrument Type | Manual surgical bone-removal instrument |
| Jaw Configuration | Model-dependent; straight or curved working end |
| Jaw Dimensions | To be confirmed for the selected model |
| Action Mechanism | To be confirmed for the supplied configuration |
| Material | To be confirmed |
| Surface Finish | To be confirmed |
| Reusable or Single Use | To be confirmed for the specific model |
| Sterilization Compatibility | Follow the validated instructions supplied for the specific instrument |
| Brand | SIMAECO MEDICAL |
| Manufacturing Origin | Sialkot, Pakistan |
Available Variants
The Jansen Bone Rongeur is cataloged in the following 18 cm configurations:
- Jansen Bone Rongeur Straight, 18 cm (7"): Straight working-end configuration.
- Jansen Bone Rongeur Curved, 18 cm (7"): Curved working-end configuration.
Confirm the required pattern, jaw dimensions, and availability with SIMAECO MEDICAL before ordering.
Frequently Asked Questions
1. What is a Jansen Bone Rongeur used for?
A Jansen Bone Rongeur is used to remove or trim small portions of bone through controlled biting action during appropriate surgical procedures.
2. What is the length of this instrument?
The specified overall length is 18 cm, equivalent to 180 mm or approximately 7 inches.
3. Is the Jansen Bone Rongeur available in straight and curved patterns?
Yes. Surgical instrument catalogs list both straight and curved Jansen Bone Rongeurs at 18 cm (7 inches). Confirm the required configuration before ordering.
4. What is the difference between straight and curved Jansen rongeurs?
The main difference is the orientation of the working end. The appropriate pattern depends on surgical access, visibility, and the intended procedure.
5. Which surgical specialties use Jansen Bone Rongeurs?
Jansen bone rongeurs are listed among ENT and bone surgery instruments. Suitability depends on the specific model and intended procedure.
6. What material is used to manufacture this instrument?
The material grade for the specific SIMAECO MEDICAL configuration should be confirmed with the manufacturer before purchase.
7. Is the Jansen Bone Rongeur reusable?
Reusability must be confirmed for the supplied model. Follow the manufacturer's instructions for use, cleaning, inspection, maintenance, and sterilization.
8. Can SIMAECO MEDICAL discuss OEM and private-label orders?
OEM and private-label enquiries can be discussed according to technical feasibility, confirmed specifications, branding requirements, packaging, and order quantity.
9. Can I request wholesale or export pricing?
Hospitals, distributors, wholesalers, and medical supply companies can contact SIMAECO MEDICAL to discuss quantities, product specifications, packaging, and export requirements.
Category
Primary Category: Orthopedic Instruments
Subcategory: Bone Rongeurs - Nibblers
Related Category: ENT Surgical Instruments and Bone Removal Instruments
OEM Manufacturing
SIMAECO MEDICAL is a surgical and medical instrument manufacturer and exporter based in Sialkot, Pakistan. OEM and private-label enquiries for Jansen Bone Rongeurs in straight and curved 18 cm configurations can be discussed according to the confirmed design, jaw dimensions, material specifications, branding, packaging, and order quantity.
Medical instrument distributors, wholesalers, hospitals, and international buyers can contact SIMAECO MEDICAL to discuss their sourcing requirements. Customization, laser marking, and packaging options are subject to technical feasibility and confirmation.
Request a Quote
Contact SIMAECO MEDICAL for pricing, straight and curved model availability, confirmed dimensions, product specifications, wholesale orders, OEM manufacturing, and export enquiries for Jansen Bone Rongeur 18 cm (7").